Knowledge Base
Search and find technical support

Accessing the control system GUI from a browser

You can acces the GUI (Graphical User Interface) through Internet Explorer (Windows) or Safari (Mac).

There are two ways:

- Open your browser and type in the IP address of your Impera Controller (be sure to be on the same network as the control system)

- Connect to the USB port on the front of your Impera controller, open your browser and type in: http://neetsweb or http://192.168.0.4  (Note, requires the Neets RNDIS USB driver)

 

If you don't have a Virtual LAN adaptor called Neets Control System RNDIS, then check this article.

Not able to access website via USB on amplifiers and control systems with GUI

 

 

Was this article helpful?
1 out of 1 found this helpful