Knowledge Base
Search and find technical support

TIP: How to use the week scheduling function

First of all; the week scheduler works the following controllers: Echo, Echo Plus, Sierra II, Tango, Alfa II and Neets DelTa, as they all have an NEB port.

In Project Designer you'll have to add the "Neets > NEB > NEB expansion board" in order to get the real time clock and the battery function, which is on the Port Expansion.

310-0110_NEB_Port_Expansion_-_EU_-_Front.jpg310-0110_NEB_Port_Expansion_-_EU_-_Backside.jpg

Start by adding the NEB expansion board to your controller in the Systems page.

In the Feedback section you can then create up to 20 events on a specific time of day and week in the scheduler and make these events do i.e. a "Press button" function. You can choose to press a physical keypad button or you can choose to press a button in the graphical user interface, e.g. on a SieRRa II.

Top tip: If you want to create an action which is not something you have on an existing button, you can create a hidden page (A page with no "Jump page" function) and execute whatever you like on this particular button.

Was this article helpful?
1 out of 2 found this helpful