Knowledge Base
Search and find technical support

How to configure Neets Switching Relay - 4 or 8 for third party control

If you want to use the Neets Switching Relay - 4 or 8 with a third party control system, there are muliple ways to do the configuration. One easy way is to use the Docklight driver that can be found on the product page under the "driver" fane.

You can download Docklight Scripting here

When you have dowloaded the driver you have three ways to connect to your Switching relay box.

- RS-232 (Baudrate 19200, rember to cross Rx/Tx)

- LAN (default IP:192.168.254.252, TCP port 5000)

- USB connection

When using the USB connection it is important that you dont have Neets Project Designer running.

In this video you can see how to connect through USB:

 
Was this article helpful?
0 out of 1 found this helpful