Knowledge Base
Search and find technical support

IR control sequence

Control sequences are intended to be used for functions like: Play, Pause, Stop, Forward etc.

Item

Description

The time between commands...

Defines the time between sending the first command and the second command. If the second command are not in use, this time is discharged.

The keyboard lock time...

Here you define the time from the last command is sent, until the device is ready for the next command.

 

The sequence (normally) has the following function:

When key is pressed:

  1. The LED on the button start flashing.
  2. First command is sent.
  3. Wait "Time between commands..." (if a second command is available).
  4. Second command is sent. (If available).
  5. Wait "Keyboard lock time...".
  6. The LED on the button stop flashing.

When key is released again:

  1. Nothing.
Was this article helpful?
0 out of 0 found this helpful