Knowledge Base
Search and find technical support

The basics of RS-485

The basics of RS-485

RS-485 is like RS-232 a serial communication bus, but where RS-232 is limited by speed and length, RS-485 is a transmitted as a balanced signal and therefore is able to be transmitted over longer distances with higher speed. 

RS-485 needs 4 wires and is also able to transmit to multiple receivers and is capable of speeds up to 10 Mbit and be transmitted up to 1200 meters, but not at the same time. The same rule goes as for RS-232, the longer the cable, the slower the transmission speed.

 

rs485network.png

 

RS-485 is not a very commonly used bus in the AV business, but it is seen in some speakers, amplifiers, mixers and in some cases manufacturers are modifying the standard and labels it something else, e.g. Fohhn-Net. Another use of the bus is actually from the lighting world, where DMX512 is a derivation of RS-485. 

Was this article helpful?
4 out of 4 found this helpful