Knowledge Base
Search and find technical support

Project Designer 1.8.2

Release date: 01-06-2016


  • Splash screen now shows which elements/resources that are being initialized.
  • Default login credentials for ClickShare devices is now 'integrator/integrator'.
  • When replacing a LAN device driver, the IP address is now also copied to the new device driver.
  • When tracking exceptions, it is now easier for Neets to reproduce.
  • FIRMWARE: Improved LAN upload speed on SieRRa II, AlFa II & DelTa.

Bug Fixes:

  • ClickShare CSE-200 was not working. Please note that it is not possible to add on Neets Control - EcHo Plus and below. And you can only have one in the entire installation.
  • When replacing one ClickShare device with another, the interface was missing on the new device.
  • It was not possible to distinguish between ClickShare interfaces in the interface toolbox, when having more than one.
  • Some places the text was cut off or looked bad (especially for german and french translations).
  • Added missing tranlated help files for german, french and chinese.
  • Button info in ribbon was showing 'Auto' for keys that didn't have LED, now showing 'None'.
  • If keypad or ClickShare interface was open in Interface or Function workspace and undoing adding the interface, it was still open in the workspace.
  • Fixed possible BSoD (Blue Screen of Death) when uploading to control systems using USB, and config file could be corrupt when BSoD occured.
  • Fixed occasional unhandled error when resizing graphical elements.
  • Fixed error when clicking outside Interface workspace when creating a new line symbol.
  • KNOWN BUG: When uploading to EcHo Plus and OsCar systems, if 'Generate website' is disabled, the project will fail to load.
  • FIRMWARE: NEB Level Control on EcHo; When adjusting the volume up, and then one step down the value is always set to minimum value.
  • FIRMWARE: SendEmail was not working.
  • FIRMWARE: LAN upload was not working on OsCar and EcHo Plus.
  • FIRMWARE: DelTa Preamp settings was not preserved after FW update from 3.7.X to 3.8.0.
  • FIRMWARE: It was not possible to connect to more than 3 extension devices.
  • FIRMWARE: KNOWN BUG: UART TX with 2 stop bits is not working! (SieRRa II, AlFa II, DelTa, SR-4, SR-8).
  • FIRMWARE: KNOWN BUG: Extension control systems (Systems connected as secondary controllers) must have an empty project uploaded (with static IP address of extension system).
Was this article helpful?
0 out of 0 found this helpful