Knowledge Base
Search and find technical support

The QueBec does not detect a VGA signal. What is wrong?

In order to work, the QueBec needs to detect a signal on the horizontal sync pin. The easiest way to make sure this is happening is to connect your source directly to your display which you then turn on to see if you get a picture.

If you have a long cable between your PC and the QueBec, the voltage may drop below the level detectable by the QueBec. Try to move the QueBec closer to your PC and see if this solves your problem. The QueBec does not interfere with EIED communication.

Was this article helpful?
0 out of 0 found this helpful