When connecting to one of the products below via USB, or configuring an amplifier / switching relay, you might experience that they are not detected by Project Designer.
Impera Sierra II
Impera Alfa II
Neets SieRRa II
Neets AlFa II
Neets Amplifier 2:25
Neets Switching Relay-4
Neets Switching Relay-8
NOTE: If you have a Windows user account without Administrator rights, see step 3 at the bottom of the article on how to install the drivers.
1. Vcom driver method
Go to Windows Device Manager and look for a 'VCom' device that is not installed correctly:
Then right-click on the 'VCom' device, and select "Update driver"
Select "Search automatically for drivers"
Driver is now installed and it should get detected by Project Designer immediately.
2. Reinstall the driver method
If the above didn't help or you already have the drivers installed and you still have no contact to the control system, go into device manager and delete all of the ports in the Ports (COM LPT) section.
Then, disconnect and reconnect the control system and wait for the driver to automatically install!
3. Install drivers without administrative rights.
Open Device Manager by clicking WIN and typing “device” and press ENTER.
As a non-admin user, you will be warned that you need to be logged on as an administrator to make changes. Click OK to continue.
Find Other devices and double-click VCom.
Click Change settings. You will be presented with an administrator logon screen. Enter the administrator user and password.
Click Update Driver.
Click “Search automatically for drivers”.
Windows should find the Neets Control Systems VCOM driver. Click Close and close Device Manager.
Connection should succeed.